S
S
UPER
ERVER 6023P-8R/6023P-8 Manual
Figure 2-5.
2-6
Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SCSI
drives and SCA backplane have been properly installed and all connections
have been made.
1. Accessing the drive bays:
All drives are accessable from the front of the server. For servicing the
CD-ROM and floppy drives, you will need to remove the top chassis
cover. The SCSI disk drives can be installed and removed from the front
of the chassis without removing the top chassis cover.
Accessing the Inside of the 6023P-8R/6023P-8
2-8