Midea MPPD40C User Manual page 38

Network configuration
CAUTIONS:
It is necessary to forget any other around network and make sure the Android or
●
iOS device just connect to the wireless network you want to configure.
Make sure the Android or iOS device wireless function works well and can be
●
connected back to your original wireless network automatically.
Kindly reminder:
User must finish all the steps in 8 minutes after powering on air conditioner, otherwise
●
you need to power on it again.
NOTE:
Make sure your devices are powered on.
●
Keep your mobile phone close enough to your device when you are connecting network to your
●
device.
Connect your mobile phone to the wireless network at home, and make sure you know the password
●
of the wireless network.
Check if your router supports 2.4 GHz wireless band and turn it on. If you are not sure whether the
●
router supports 2.4 GHz band, please contact the router manufacturer.
The device cannot connect to the wireless network that requires authentication, and it usually appears
●
in public area such as hotels, restaurants, etc. Please connect to a wireless network that does not
require authentication.
It is recommended to use a wireless network name that only contains letters and numbers. If your
●
wireless network name contains special characters, please modify it in the router.
Turn o the WLAN+ (Android) or WLAN Assistant (iOS) function of your mobile phone when
●
connecting network to your devices.
In the case that your device connected to wireless network before but it needs to reconnect, please
●
click "+" on app Home page, and add your device again by the device category and model according
to the instructions on app.
Register and log in
Open the MSmartHome app, and create a new account to
start ( you can also register through a third-party account).
If you already had an existing account, use the account to
log in.
Connect your devices to MSmartHome
1. Please make sure your mobil e phone is connected to wireless
network. If not, go to Settings and turn on the wireless connection,
select and connect to a wireless network. Also please turn on the
Bluetooth on your phone. If not, go to Settings and turn it on.
2. Please power on your devices.
3. Open MSmartHome app on your phone.
4. If a message of "Smart devices discovered nearby" appears,
click to add.
37
Login
Enter email
XXXXXXXXX
Login
Enter password
Login
...
Washing machine