Table of Contents
Advertisement
How to Use Advanced Functions
SET function
•
Press the SET button to enter the function setting, then press SET button or TEMP
button to select the desired function. The selected symbol will flash on the display area, press
the OK button to confirm.
•
To cancel the selected function, just perform the same procedures as above.
•
Press the SET button to scroll through operation functions as follows:
Fresh (
) I Sense* (
[ ]: If your remote controller has I Sense button, you can not use the SET button to select
*
the I sense feature.
FRESH function (
When the FRESH function is initiated, the Ionizer/Plasma Dust Collector(depending on models) is
energized and will help to remove pollen and impurities from the air.
AP function (
) (some units) :
Choose AP mode to do wireless network configuration. For some units, it doesn't work by
pressing the SET button. To enter the AP mode, continuously press the LED button seven times
in 10 seconds.
or
) AP mode(
) (some units) :
)
35
or TEMP
Advertisement
Table of Contents
