Midea MPPD40C User Manual page 35

How to Use Advanced Functions
SLEEP Function
Press SLEEP button
The SLEEP function is used to decrease
energy while you sleep(and don't need
the same temperature settings to stay
comfortable). This function can only by
activated via remote control.
For the details, please see "sleep operation "
in " USER'S MANUAL ".
NOTE:The SLEEP function is not available in
FAN or DRY mode.
I SENSE (some models)
Press I SENSE button
When the I SENSE function is activated, the
remote display is actual temperature at its
location. The remote control will send this
signal to the air conditioner every 3 minutes
interval until press the I SENSE button again.
.
34
LOCK function
5s
+
or
5s
+
Press together LED button and I SENSE or
LED and °C/°F button at the same time more
than 5 seconds to activate Lock function.
All buttons will not response except pressing
these two buttons for two seconds again to
disable locking.
5s
5s