S
S
6021i
UPER
ERVER
Set User's Password
When the item "Set User's Password" is highlighted on the Security Main
Menu, press the <Enter> key to activate the following screen. When
prompted, type in User's password in the dialogue box to set or to change
the User's Password.
Security Option
When the item "Security Option" is highlighted on the Security Main Menu,
press the <Enter> key to activate the screen shown below.
This option allows the user to determine if the password is required every
time the system boots up or only when you enter the CMOS setup. The
settings are "System" and "Setup".
Manual
7-24