Table of Contents
Advertisement
1-3
Server Chassis Features
The SC813S-500 is one of Supermicro's third-generation 1U chassis and
features four hot-swap SCSI hard drive bays, a slim CD-ROM drive, a slim
3.5" floppy drive and a revolutionary cooling design that can keep today's
most powerful processors running well below their temperature thresholds.
The following is a general outline of the main features of the SC813S-500
chassis.
System Power
When configured as a SuperServer 6014A-8, the SC813S-500 chassis in-
cludes a 500W cold-swap power supply.
SCSI Subsystem
The SCSI subsystem supports four 80-pin SCA Ultra320 SCSI hard drives.
(Any standard 1" drives are supported.
ment.) The SCSI drives are connected to an SCA backplane that provides
power, bus termination and configuration settings.
also hot-swap units.
Control Panel
The SC813S-500 control panel provides important system monitoring and
control information.
drive activity and system overheat conditions.
power button and a system reset button.
I/O Backplane
The SC813S-500 is a 1U rackmount chassis. Its I/O backplane provides one
full-height full-length and one half-height half-length PCI slots, one COM port
(the other is internal), two USB ports, a VGA port, a SCSI port, PS/2 mouse
and keyboard ports and two Ethernet (LAN) ports.
LEDs indicate power on, network activity, hard disk
1-5
Chapter 1: Introduction
SCA = Single Connection Attach-
The SCSI drives are
Also present are a main
Advertisement
Table of Contents
