Table of Contents
Advertisement
S
S
UPER
ERVER 6014A-8 Manual
Hardware Monitor
CPU Temperature Threshold
This option allows the user to set a CPU temperature threshold that
will activate the alarm system when the CPU temperature reaches this
pre-set temperature threshold. The options are 85
o
100
C.
Highlight this and hit <Enter> to see monitor data for the following items:
CPU1 Temperature: This item displays CPU1 Temperature.
CPU2 Temperature: This item displays CPU2 Temperature.
System Temperature: This item displays the system Temperature.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds
of the onboard fans. If the option is set to "3-wire", the fan speed is con-
trolled based upon the CPU die temperature. When the CPU die temperature
is higher, the fan speed will be higher as well. If the option is set to "4-
wire", the fan speed will be controlled by the Thermal Management Settings
pre-configured by the user at this feature. Select "3-wire" if your chassis
came with 3-pin fan headers. Select "4-wire" if your chassis came with 4-
pin fan headers.
station. Select "Server" if your system is used as a Server. Select "Disable"
to disable the fan speed control function to allow the onboard fans to run
at the full speed (12V) at all time.
(Server),
3-wire (Workstation),
The recommended setting for the
Select "Workstation" if your system is used as a Work-
4-wire (Server) and 4-wire (Workstation).
6014A-8
7-18
o
C, 90
The options are Disable,
is "3-wire (Server)".
o
C, 95
o
C and
3-wire
Advertisement
Table of Contents
