Table of Contents
Advertisement
S
S
UPER
ERVER
Rackmount hardware (with screws):
Two (2) rack rail assemblies
Six (6) brackets for mounting the rack rails to a rack/Telco rack
One (1) CD-ROM containing drivers and utilities:
ATI Rage XL 8MB PCI graphics controller driver
LAN driver
SCSI driver
SuperServer 6011D User's Manual
* Type and number depends upon the configuration ordered.
1-2
Server Chassis Features
The SuperServer 6011D is a high-end, scaleable 1U rackmount server plat-
form designed with today's most state-of-the-art features. The following is
a general outline of the main features of the SC810 chassis.
System Power
When configured as a SuperServer 6011D, the SC810 chassis includes a
250W power supply.
SCSI Subsystem
The SCSI subsystem supports two 80-pin SCA Ultra160 SCSI hard drives.
(Any standard 1" drives are supported.
ment.) The SCSI drives are connected to an SCA backplane that provides
power, bus termination and configuration settings.
also hot-swap units.
Control Panel
The SC810's control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive ac-
tivity and system overheat conditions.
main power button and a system reset button.
6011D
User's Manual
SCA = Single Connection Attach-
The control panel also includes a
1-2
Such SCSI drives are
Advertisement
Table of Contents
