Table of Contents
Advertisement
CarboVis 70x IQ TS
Menu item
Cal - # raw value 1
Cal - ref. value 1
Cal - # raw value 2
Cal - ref. value 2
Main sensor
Save and quit
Quit
ba75950e03
05/2017
Settings
Value pairs of the user calibration for TSS measurement (see section
4.3.2).
Note: Leave those values unchanged during the initial commission-
ing.
-
-
Explanations
Information that there are further sensor
overlapping settings in the setting menu of
the relevant main sensor (
Cleaning duration Air
etc.).
The system confirms the saving of the set-
tings and the display switches to the next
higher level.
The display switches to the next higher
level without storing the new settings.
Commissioning
,
Meas. interval
,
Signal smoothing
23
Advertisement
Table of Contents
