SOLTEK NV400-64 Manual page 68

NV400-64 / NV400-L64
Reset Configuration
Resource Controlled
IRQ Resources Press Enter. Please refer to the list below:
Phoenix - AwardBIOS CMOS Setup Utility
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
: Move Enter: Select
F5: Previous Values
PCI/VGA Palette Snoop This option allows the BIOS to preview VGA status,
PCI Slot 1/2/3/4/5 IRQ
Assigned
Normally, you leave this Disabled(default). Select
Data Enabled to reset Extended System Configuration
Data (ESCD), when you exit Setup if you have in-
stalled a new add-on and the system reconfiguration
has caused such a serious conflict that the operat-
ing system cannot boot.
The Plug and Play Award BIOS can automatically
By configure all the boot and Plug and Play-compat-
ible devices. If you select Auto(default), all the inter-
rupt request (IRQ) and DMA assignment fields will
not appear, as the BIOS automatically assigns them.
If you select Manual, the IRQ Resources item will
appear for your configuration (see below).
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
and to modify the information delivered from the
feature Connector of the VGA card to MPEG card.
This option can solve the display inversion to black
after you have used a MPEG card.
Allows you to specify the IRQ for the PCI slots.
Choices: Auto; 3; 4; 5; 7; 9; 10; 11; 12; 14; 15
72
Item Help
Esc: Exit F1: General Help
F7: Optimized Defaults