Key Pad: Up-C30Pk - Sharp UP-5350 Installation Manual

1. LIST FOR SCREWs
No. PARTS CODE
XEBSD30P08000
- XEBSD26P06000
L
-
- XEBSD26P08000
-
M
XHBSD30P06000
L
M
2. INSTALLATION OF PAPER NEAR END SENSOR
[PARTS LIST]
No. PARTS NAME PARTS CODE
PAPER NEAR
1 DUNTK3819BHZZ
END SENSOR
NEAR END
2 SENSOR QCNCM6865RC0B
CONNECTOR
1. Remove the BOTTOM PLATE .
2. Remove the PS+CONTROL PWB .
3. Solder the CONNECTOR
CN1)
4. Install the NEAR END SENSOR UNIT
it with the fixing SCREW .
3
2
1
Fig. 12
L [mm]
M [mm]
3 8
2.6 6
2.6 8
3 8
NOTE
SENSOR UNIT,
FIXING SCREW
2 pin connector
to the PS+CONTROL PWB (No.
to the CABINET , and fix

20. KEY PAD: UP-C30PK

Opetion for KB.
Standard for TQ, TS, KA
1) Remove the upper cabinet.
2) Remove the keyboard lid from the upper cabinet.
Keyboard is tightly engaged and hard to be removed.
When removing it, use nippers to cut off four pawls A from the
back of the upper cabinet.
1