Advertisement
„ DN setting
Basic procedure
Be sure to stop the air conditioner before making settings.
(Change the setup while the air conditioner is not working.)
CAUTION
Set only the Code No. shown in the following table: Do NOT set any other Code No.
If a Code No. not listed is set, it may not be possible to operate the air conditioner or other trouble with the product
may result.
Indoor UNIT No.
Set data
3,6
4,5
1
1
2
3
4
Code No.
5
6
2,4,5
7
Press and hold menu button and [
simultaneously for 10 seconds or more.
• After a while, the display flashes as shown in the figure.
"ALL" is displayed as indoor unit numbers during initial
communication immediately after the power has been
turned on.
Each time [
] [
] setting button is pressed,
indoor unit numbers in the group control change
cyclically.
Select the indoor unit to change settings for.
• The fan of the selected indoor unit runs and the louvers
start swinging. The indoor unit can be confirmed for which
to change settings.
Press OFF timer button to confirm the selected
indoor unit.
Press the menu button to make Code No. [
Change Code No. [
Press the menu button to make Set data [
flash. Change Set data [
setting button.
Press OFF timer button to complete the set up.
• To change other settings of the selected indoor unit,
repeat from Procedure
– 39 –
] setting button
] with [
] [
] setting button.
] with [
] [
4
.
] flash.
]
]
Advertisement
