Ii-6-2 Port Settings - Draytek VigorAP 1000C User Manual

II-6-2 Port Settings

To avoid wrong connection due to the insertion of unsuitable Ethernet cable, the function of
physical LAN ports can be disabled via web configuration.
Available settings are explained as follows:
Item
Port Control
Enable Port Control
Disable Port
Port/Subnet Mapping
Subnet
After finishing this web page configuration, please click OK to save the settings.
Description
Check it to enable the port control. If it is enabled, you are allowed to
disable the function of physical LAN port by checking the
corresponding check box.
Choose and check the LAN port.
When Enable 2 Subnet is enabled in Wireless LAN >> General
Setup, you can set subnet (LAN-A or LAN-B) for LAN Port 2.
In AP mode, if you specify LAN-B for Port 2, wireless clients on LAN-B
SSIDs can access Internet through Port 2 independently.
However, if you specify LAN-A for Port2, both LAN ports can access
LAN-A while wireless clients on LAN-B SSIDs can use local service.
90