Table of Contents
Advertisement
I-1 Introduction
This is a generic International version of the user guide. Specification, compatibility and features
vary by region. For specific user guides suitable for your region or product, please contact local
distributor.
Thank you for purchasing this VigorAP 1000C!
As a tri-band AP, it provides an extra 5GHz Wireless band which increases the supported number of
wireless devices. In Mesh mode or Range Extender mode, this extra band can also be dedicated as
the Uplink band to the Internet. VigorAP 1000C is suitable to construct a small Wireless network.
VigorAP 1000C can operate in standalone mode for your office network or a classroom; connected
to your LAN and offering you wireless access.
It makes high density with quality-performance be feasible for users as it is going to be
implemented with DrayTek VigorACS 2 supports configuration, firmware upgrade, status, and
monitoring.
The Power of Ethernet (PoE) on VigorAP 1000C relieves the installation of the power plug. The
massive deployment of VigorAP 1000CC for hospitalities and school environment will be much
easier.
With the optimized antennas built-in, DrayTek VigorAP 1000C ceiling-mount wireless access point is
ideal for hospitalities, small offices, and small campus.
Easy install procedures allows any computer users to setup a network environment in very short
time - within minutes, even inexperienced users. Just follow the instructions given in this user
manual, you can complete the setup procedure and release the power of this access point all by
yourself!
1
Advertisement
Table of Contents
