Ii-4-1 Mesh Setup - Draytek VigorAP 1000C User Manual

II-4-1 Mesh Setup

Such page can determine the role of the VigorAP connecting to the computer physically. For a mesh
root, you can search and specify mesh nodes as members under current mesh group.
Available settings are explained as follows:
Item
Role
When Mesh Root is
selected
When Mesh Node is
selected
Mesh Group
Description
Mesh Root – When VigorAP is connected to a Vigor router with a
physical Ethernet cable, it can be set as mesh root to deliver the
wireless signals to a mesh node AP.
Mesh Node – As a mesh node, such VigorAP can pass the wireless
connection signal to other mesh node or a remote device (PC, CPE,
mobile phone).
In addition, VigorAP can be searched by mesh root AP and join the
mesh group of the root AP. The configuration set for mesh root can be
applied to mesh node.
Group Name - Display the name of the current mesh group.
Log Level – Choose Basic or Detailed. Related information will be
shown on the Diagnostics>>System Log.
Wired Uplink – Check the box if such VigorAP connects to an uplinked
mesh root or an uplinked mesh node with an Ethernet cable.
Wireless Uplink Band – Choose a wireless band for connecting with
an uplinked mesh root or an uplinked mesh node.
Log Level – Choose Basic or Detailed. Related information will be
shown on the Diagnostics>>System Log.
When the VigorAP is set as mesh root or is added to a mesh group,
the basic information including role, MAC address, and model name
of the AP will be shown in this area.
72