Iii-2-3 Overload Management - Draytek VigorAP 1000C User Manual

III-2-3 Overload Management

Load Balance can help to distribute the traffic for all of the access points (e.g., VigorAP 1000C)
registered to Vigor router. Thus, the bandwidth will not be occupied by certain access points.
However, traffic overload might be occurred if too many wireless stations connected to VigorAP
1000C for data incoming and outgoing. Therefore, "Force Overload Disassociation" is required to
terminate the network connection of the client's station to release network traffic. When the
function of "Force Overload Disassociation" in web user interface of Vigor router (e.g., Vigor2860 or
Vigor2925 series) is enabled, wireless clients specified in black list of such web page will be
disassociated to solve the problem of traffic overload.
The following web page is used to configure white list and black list for wireless stations.
Available settings are explained as follows:
Item
White List/Black List
Client's MAC Address
Apply to
Description
Display the information (such as index number, MAC address and
comment) for all of the members in White List/Black List.
Wireless stations listed in Black List will be forcefully disconnected
first when traffic overload occurs and "Force Overload Disassociation"
is enabled.
Specify the MAC Address of the remote/local client.
White List – MAC address listed inside Client's MAC Address will be
categorized as one of members in White List.
Black List - MAC address listed inside Client's MAC Address will be
categorized as one of members in Black List.
109