II-4-2 Mesh Status
This page shows that one Mesh Group can contain up to 8 devices. In the following figure, the 7th
Device with hop 0 is one special Ethernet Backhaul. It means this node will use Ethernet cable to join
the mesh group while others use the wireless link.
Item
Local Status
Devices
Total number of
Clients
Description
Display general information for such VigorAP.
Display detailed information for this VigorAP (as mesh root) and mesh
node(s) in the group.
Index – Display the number of the device within a mesh group.
Status – Display the role of the device within a mesh group.
Device Name – Display the name of the device (for identification).
IP Address – Display the IP address of the device.
MAC Address – Display the MAC address of the device.
Hop – Display the level of the devices within a mesh group. "0" means
the access point is connected to a device by using Ethernet cable
(wired). "1" to "3" means the level of the access point within a mesh
group and it connects to other access point via wireless link.
Uplink – Display the MAC address of the device that the AP connects
to.
Display the station list of all mesh devices.
77