Ii-3-6 Ap Discovery - Draytek VigorAP 1000C User Manual

II-3-6 AP Discovery

VigorAP 1000C can scan all regulatory channels and find working APs in the neighborhood. Based
on the scanning result, users will know which channel is clean for usage. Also, it can be used to
facilitate finding an AP for a WDS link. Notice that during the scanning process (about 5 seconds), no
client is allowed to connect to VigorAP.
This page is used to scan the existence of the APs on the wireless LAN. Please click Scan to discover
all the connected APs.
Each item is explained as follows:
Item
SSID
BSSID
RSSI
Channel
Encryption
Authentication
Scan
AP's MAC Address /
AP's SSID
Description
Display the SSID of the AP scanned by VigorAP 1000C.
Display the MAC address of the AP scanned by VigorAP 1000C.
Display the signal strength of the access point. RSSI is the abbreviation
of Received Signal Strength Indication.
Display the wireless channel used for the AP that is scanned by
VigorAP 1000C.
Display the encryption mode for the scanned AP.
Display the authentication type that the scanned AP applied.
It is used to discover all the connected AP. The results will be shown
on the box above this button
Display the MAC address and SSID of the AP selected from the Access
Point.
51