Table of Contents
Advertisement
IV-2-3 Wi-Fi Auto On/Off
When VigorAP is able or unable to ping the specified host, the Wi-Fi function will be turned on or off
automatically. The purpose of such function is to avoid wireless station roaming to an AP which is
unable to access Internet.
Available settings are explained as follows:
Item
Enable Connection
Detection
Ping Host
When the AP is unable to ping the host
Wi-Fi
Sound Buzzer
LED
Click OK to save the settings.
Description
Check the box to enable such function.
Type an IP address (e.g., 8.8.8.8) or a domain name (e.g., google.com)
for testing if the access point is stable or not.
Off - When VigorAP is unable to ping the host, disconnect the Wi-Fi
network.
No Change - Wi-Fi network will keep the original state (no mater on or
off) even VigorAP is unable to ping the host.
None - When the AP is unable to ping the host, VigorAP will not make
any sound.
Beep i ~ BeepV - When the AP is unable to ping the host, VigorAP will
sound with the selected buzzer type.
Off - When VigorAP is unable to ping the host, the LED (2.4G/5G) will
be off automatically.
No Change - When VigorAP is unable to ping the host, the LED
(2.4G/5G) will keep the original state (no matter on or off).
132
Advertisement
Table of Contents
