Table of Contents
Advertisement
III-2 Central AP Management
Such menu allows you to configure VigorAP device to be managed by Vigor router.
III-2-1 General Setup
Available settings are explained as follows:
Item
Enable AP
Management
Enable Auto Provision
Click OK to save these settings.
Description
Check the box to enable the function of AP Management (APM).
VigorAP 1000C can be controlled under Central AP Management in
Vigor2862 series. When both Vigor2862 series and VigorAP 1000C
have such feature enabled, once VigorAP 1000C is registered to
Vigor2862 series, the WLAN profile pre-configured on Vigor2862
series will be applied to VigorAP 1000C immediately. Thus, it is not
necessary to configure VigorAP 1000C separately.
107
Advertisement
Table of Contents
