Table of Contents
Advertisement
Installer's Information
ELECTRICITY SUPPLY
A 120V 12.5A 60Hz supply is required.
Rated power consumption:
Ei25: 1400 Watts
Optional (Hardwire only) 240V 2 phase 15A 60Hz supply can be utilized.
Rated power consumption:
Ei25: 2800 Watts
THIS APPLIANCE MUST BE GROUNDED.
IMPORTANT: A 15 AMP, 60Hz circuit is required for 120 VAC installation. Additional appliances on the same circuit may exceed the
current rating of that circuit. A dedicated circuit is not required, but is preferred to prevent circuit breaker trips or fuse failure. Optional
240 VAC 2 phase may only be hardwired. FAILURE TO ADEQUITLY POWER APPLIANCE AT REQUIRED VOLTAGE AND AMPERAGE WILL
VOID YOUR WARRANTY.
A 3 prong plug with 93.3" (2.37m) power lead and a separate hard wiring kit are supplied.
2 x Remote control handset battery (AAA).
Note: The wiring from the appliance to the breaker must be supplied by a qualified electrician. This is not supplied with the appliance.
CONTROL SYSTEM TECHNICAL DATA
Hardware
Software
Frequency
Maximum Transmit Power
MAIN CONTROL BOARD
RC01-070A01
V0
REMOTE RECEIVER
BOARD
RF290B V1.2
REMOTE CONTROL
RF290A-TX-V1.3
V2.4.1
ASK/OOK 433.92MHZ
10mW
15
Advertisement
Table of Contents
