3-Sided Faceplate Installation
These instructions are for use with the following products:
PART #
Description
281-912
Ei29 Faceplate 3-Sided Flush
281-937
Ei29 Faceplate Custom 3-Sided
288-912
Ei25 Faceplate 3-Sided Flush
288-937
Ei25 Faceplate Custom 3-Sided
333-912
Ei33 Faceplate 3-Sided Flush
333-937
Ei33 Faceplate Custom 3-Sided
1. Remove the front glass with the suction cup provided.
2. Uninstall the bottom trim by removing these 4 screws. See below.
The bottom trim is not required and may be recycled along with the
4 screws.
3. Remove the four screws supplied with the 3-sided faceplate.
22
Installer's Information
4. Install the faceplate from the top, then pull forward.
5. Fasten the four screws on both sides to attach the faceplate.
6. Faceplate installed.