Appendixes; Specifications - Sony PVM-L2300 Operation Manual

Appendixes

Specifications

General
LCD panel a-Si TFT Active Matrix
Picture size 22.5 inches
Display area 483.84 (H) × 302.4 (V)
Resolution 1920 (H) × 1200 (V) pixel
Backlight CCFL
Panel drive RGB 10 bit
Panel frame rate
96/100/120 Hz
Viewing angle 89º/89º/89º/89º
(up/down/left/right, contrast 10:1)
Pixel efficiency 99.99%
Warm-up time Approx. 30 minutes
Power consumption
Approx. 140 W (at maximum load)
Approx. 80 W (the BKM-243HS is
attached, the default status)
Power requirements
100 to 240 V AC,
1.4 to 0.6 A, 50/60 Hz
Peak inrush current
(1) Power ON, current probe method:
20 A (100 V), 53 A (240V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
12 A (230 V)
Mass Approx. 16 kg (35 lb 4 oz)
Input/Output
Option slot Four slots
Signal format
Refer to "Available Signal Systems"
(page 100) and "Available Signal
Formats" (page 102).
PC input DVI-D × 1
HDCP correspondence
Signal format
Refer to "DVI-D" (page 106) of
"Available Signal Formats".
96
Specifications
TM
HDMI HDMI × 1
HDCP correspondence, Deep Color
correspondence
Signal format
Refer to "HDMI" (page 107) of
"Available Signal Formats".
Control OPTION A: Mini-DIN 8-pin (female) ×
1
OPTION B: USB (Type A) type × 1
LAN (10BASE-T/100BASE-TX): RJ-
45 × 1
PARALLEL REMOTE: D-sub 9-pin
(female) × 1
DC 5V OUT: Circle 4-pin (female) × 1
Picture performance
Normal scan 0% scan
Native scan Mapping the pixels of the signal to the
panel to one-to-one mode, or
displaying an SD signal of non-
square pixels (the number of H
pixels of the signal system is 720 or
1440) or a 640 × 480 SD signal of
DVI video/HDMI video by scaling
processing of doubling for the V
direction and correct aspect ratio for
the H direction and also optimizing
and displaying a picture by
modifying the aperture coefficient
value, filter coefficient value, etc.
Under scan 3% under scan
Over scan Mask of 5% over scan portion in the
normal scan
Color temperature
D65, D93 (Setting possible in other color
temperature)
Standard luminance
2
100 cd/m
(1.0 Vp-p reference signal, 100% white
signal input)
Color space (color gamut)
ITU-R BT.709, BVM EBU, BVM
SMPTE-C, PVM-L2300 Native*
* The PVM-L2300 individual
chromaticity points. The widest
(Preset1 to Preset5)