Siemens SIMATIC IPC BX-32A Operating Instructions Manual page 61

Procedure - Removal
1. Remove the designated screws of the
2. Remove the heat sink upwards and set it
3. Remove the designated screw on the
4. Pull the M.2 NVMe SSD out of the slot.
Procedure - Installation
Follow the steps for removal in reverse order.
See also
Hardware accessories (Page 16)
SIMATIC IPC BX-32A
Operating Instructions, 09/2023, A5E52798407-AB
heat sink with the type Torx T10 screw-
driver.
aside.
motherboard with the screwdriver of the
type Torx T8.
Expanding and assigning parameters to the device
6.6 Drives
61