Siemens SIMATIC IPC BX-32A Operating Instructions Manual page 22

Table of Contents

Safety instructions

2.4 Notes on ambient and environmental conditions

• For installation in a cabinet, observe the SIMATIC setup guidelines as well as the relevant

DIN/VDE requirements or the applicable country-specific regulations.

• Always maintain a minimum clearance of 100 mm to the area of the ventilation slots and

do not cover the ventilation slots of the enclosure.

High frequency radiation

Immunity to RF interference

The device has an increased immunity to RF radiation according to the specifications on

electromagnetic compatibility in the technical specifications.

High-frequency radiation outside the specified interference immunity ranges can result in

device malfunctions.

Persons are injured and the plant is damaged.

• Avoid high-frequency radiation.

• Remove radiation sources from the environment of the device.

• Switch off radiating devices.

• Reduce the radio output of radiating devices.

• Read the information on electromagnetic compatibility.

• Read the information in the technical specifications.