Camera Connector (J10) - Arduino ASX00049 Product Reference Manual

7.5.9 Camera Connector (J10)

The Portenta Hat Carrier, when combined with a Portenta X8, supports MIPI cameras. The latter can be plugged
into the onboard camera connector shown in Figure 13 via a flexible flat cable.
Some of the potential compatible devices are the following:
OmniVision® OV5645 sensor, like the one used in the Raspberry Pi® Camera Module 1.
Sony® IMX219 sensor, like the one used in the Raspberry Pi® Camera Module 2.
26 / 34
Arduino® Portenta Hat Carrier
Figure 13. Camera connector of the Portenta Hat Carrier
Arduino® Portenta Hat Carrier Modified: 25/10/2023