Call Forwarding; Do Not Disturb; Recent Calls List - Polycom VVX 250 Quick Reference Manual

CALNET: AT&T Hosted Voice Service

Call forwarding

Enable call forwarding
•
When your phone is idle, enter:
*72 Call Forwarding Always
*92 Call Forwarding No Answer
•
Enter the forward-to number.
•
Select the Dial soft key.
•
Listen for the voice prompt that confirms
Call Forwarding is turned on.
Note: The forward-to number can be an extension
or any 10-digit phone number.
Disable call forwarding
•
When your phone is idle, enter:
*73 Call Forwarding Always
*93 Call Forwarding No Answer
•
Select the Dial soft key.
•
Listen for the voice prompt that confirms
Call Forwarding is turned off.

Do not disturb

The do not disturb option prevents incoming calls
from ringing. The line indicator will not flash. Calls
will go directly to voicemail if no other forwarding
has been configured. A received call while do not
disturb is active will not display as a missed call.
When activated, a red circle with a white line is
visible next to each line key and in the center of the
graphic display.
Enable / Disable:
•
Select the Do Not Disturb (DND) soft key.
Enable / Disable with shared lines individually:
•
Select the Do Not Disturb (DND) soft key.
•
Select the desired line.
•
Select the Enable / Disable soft key.
Enable / Disable with shared lines whole phone:
•
Select the Do Not Disturb (DND) soft key.
•
Select the Set All / Clear All soft key.
Note: You can still make outgoing calls as normal.
On a shared line, your phone will not ring, but the
line will blink, and you can still answer the call.
© 2021 AT&T Intellectual Property. All rights reserved. AT&T and the Globe logo are registered trademarks of AT&T Intellectual Property.
Quick reference guide – Polycom VVX 250

Recent Calls list

By default, when selecting the Recent Calls, the phone
displays the entire call history but can be filtered by
call type. Each call type will maintain up to 100
instances of each of the following call types:
•
Missed calls
•
Received calls
•
Placed calls
Retrieve call list:
•
Select the Directory soft key.
•
Select Recent Calls.
•
Select the Type soft key.
•
Select the desired call list.
•
Select the Dial soft key to place the call.
Delete an individual log entry:
•
Select the Directory soft key.
•
Select Recent Calls.
•
Select the Type soft key.
•
Select the desired call list.
•
Select the individual call to be deleted.
•
Select the Info soft key.
•
Select the Delete soft key.
Delete entire call list:
•
Select the Directory soft key.
•
Select Recent Calls.
•
Select the More soft key.
•
Select the Clear soft key.
•
Select the call list to be deleted.
•
Select the Yes soft key.
Save an individual call log entry:
•
Select the Directory soft key.
•
Select Recent Calls.
•
Select the Type soft key.
•
Select the desired call list.
•
Select the individual call to be saved.
•
Select the Info soft key.
•
Select the Save soft key.
•
Select the Save soft key again.
Callers
By default, when selecting the Callers soft key, the
phone displays the Received call list, but can be
filtered by call type.
Page 6