Table of Contents
Advertisement
Viewing Station Information
DAB/DAB+ stations broadcast additional information.
Press MENU button repeatedly to view information
through DLS (Dynamic Label Segment), Program
Type, Ensemble, Frequency, Signal quality, Signal
strength, Bitrate, Codec and Date.
Note: you can press
show of station, and you can press
a second time shift to play slide show in full
screen. Now if you attend to view station
information, first you need pressing
to switch off slice show, and then press MENU
button repeatedly to view information.
Showing Signal Strength
While you selected Signal strength, a signal bar with
the strength of the current station will show on the
display.
The indicator on the signal bar shows the minimum
acceptable signal level.
Note: Stations with signal strength below the
minimum signal level may not provide a steady
stream of audio.
Storing Preset Stations
Your radio can store up 6 of your favourite
DAB/DAB+ stations as preset stations. This will
enable you to access your favourite stations quickly
and easily.
1. While a program is playing, press and hold one
of DIRECT PRESET buttons P1- P6 until the
display show 'Preset # stored'
2. Preset number '
display.
Note: you can press SWR4 button to listen
SWR4 station if the station is broadcasting in
button to play slide
#' will show on the bottom of
your current area. 'No SWR4 station' will appear
after full scanning if SWR4 station cannot be
searched in your location.
Recalling Preset Stations
1.
Press one of DIRECT PRESET buttons P1- P6
directly to play the preset station
button
2.
'Preset Empty' will be shown if the preset station
isn't allocated.
button
7
Advertisement
Table of Contents
