Table of Contents
Advertisement
Preparation and Installation
1
1-10
Figure 1-2. Installing a PrPMC750 on a VMEmodule
5. Align the standoffs on the PrPMC750 mezzanine with the
VMEmodule or CompactPCI board and install the phillips-head
screws through the holes in the base board and the spacers. Tighten
the screws.
6. Install the VME or CompactPCI assembly in its proper card slot.
Ensure the module is seated properly in the backplane connectors.
Do not damage or bend connector pins.
7. Replace the chassis or system cover(s) and connect the system to the
AC or DC power source. Turn the equipment power on.
Computer Group Literature Center Web Site
Advertisement
Table of Contents
