Motorola PRPMC750 Installation And Use Manual page 6

All Motorola PWBs (printed wiring boards) are manufactured with a flammability rating
of 94V-0 by UL-recognized manufacturers.
This equipment generates, uses and can radiate
!
electromagnetic energy. It may cause or be susceptible to
electromagnetic interference (EMI) if not installed and used
CAUTION
with adequate EMI protection.
This is a Class A product. In a domestic environment, this
!
product may cause radio interference, in which case the user
may be required to take adequate measures.
WARNING
Motorola Computer Group products with the CE marking
comply with the EMC Directive (89/336/EEC). Compliance
with this directive implies conformity to the following
European Norms:
EN55022 "Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology
Equipment"; this product tested to Equipment Class A
EN50082-1:1997 "Electromagnetic Compatibility—Generic
Immunity Standard, Part 1. Residential, Commercial and
Light Industry"
System products also fulfill EN60950 (product safety) which
is essentially the requirement for the Low Voltage Directive
(73/23/EEC).
Board products are tested in a representative system to show
compliance with the above mentioned requirements. A proper
installation in a CE-marked system will maintain the required
EMC/safety performance.
Flammability
EMI Caution
CE Notice (European Community)