Motorola PRPMC750 Installation And Use Manual page 78

Primary SCSI Data Bus Width [W/N] = N?
Secondary SCSI identifier = 07?
Select the identifier. (Default = 07.)
NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?
Note
NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?
NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?
The time in seconds that a boot from the NVRAM boot list will delay
before starting the boot. The purpose for the delay is to allow you the
option of stopping the boot by use of the
is from 0-255 seconds. (Default = 5 seconds)
Auto Boot Enable [Y/N]
http://www.motorola.com/computer/literature
Wide SCSI (16-bit bus).
W
Narrow SCSI (8-bit bus). (Default)
N
Give boot priority to devices defined in the fw-boot-
Y
path global environment variable (GEV).
Do not give boot priority to devices listed in the fw-
N
boot-path GEV. (Default)
When enabled, the GEV (Global Environment Variable) boot
takes priority over all other boots, including Autoboot and
Network Boot.
Give boot priority to devices defined in the fw-boot-
Y
path GEV at power-up reset only.
Give power-up boot priority to devices listed in the
N
fw-boot-path GEV at any reset. (Default)
= N?
The Autoboot function is enabled.
Y
The Autoboot function is disabled. (Default)
N
ENV - Set Environment
key. The time value
BREAK
6
6-5