Table of Contents
Advertisement
Connecting modules while power is applied may result
!
in damage to components on the module.
Caution
Dangerous voltages, capable of causing death, are
!
present in this equipment. Use extreme caution when
handling, testing, and adjusting.
Warning
2. Remove the chassis cover as instructed in the equipment user's manual.
3. Remove the filler panel(s) from the appropriate card slot(s) at the rear
of the chassis (if the chassis has a rear card cage). Other modules in the
unit may have to be moved to allow space for the cables connected to
the P2 adapter and the MVME712M.
4. Continue the installation procedure by choosing one of the
configurations listed in Table 2-3 and described on the following pages.
Note that the designations "A" through "F" are used solely as conve-
nient references.
Configuration
Installing the MVME712M Module and P2 Adapter Board
Table 2-3. MVME712M Configurations
Internal
SCSI Devices
A
X
B
X
B1
X
C
X
C1
X
D
X
E
F
External
Pages
SCSI Devices
2-18, 2-19
2-20, 2-21
2-22, 2-23
X
2-24, 2-25
X
2-26, 2-27
X
2-28, 2-29
X
2-30, 2-31
X
2-32, 2-33
2
2-17
Advertisement
Table of Contents
