Loading Paper; Important Points About Paper; Names And Locations Of Trays - Sharp MX2300N User Manual

2

LOADING PAPER

This chapter explains how to load paper in the machine's trays.

IMPORTANT POINTS ABOUT PAPER

This section provides information that you should know before loading paper in the paper trays.
Be sure to read this section before loading paper.

NAMES AND LOCATIONS OF TRAYS

The trays are identified by the names indicated below. For the sizes and types of paper that can be loaded in each tray,
see the Safety Guide.
Tray 3 (when a stand/1 x 500 sheet
paper drawer or a stand/2 x 500
sheet paper drawer is installed)
Tray 4 (when a stand/2 x 500 sheet
paper drawer is installed)
Tray numbers
The tray numbers vary depending on the peripheral devices that are installed.
Peripheral devices
installed
Stand/1 x 500 sheet paper
drawer + Large capacity
tray
Stand/2 x 500 sheet paper
drawer + Large capacity
tray
None installed
The explanations in this manual assume that a stand/2 x 500 sheet paper drawer and large capacity tray are installed.
If your machine has a stand/1 x 500 sheet paper drawer and a large capacity tray installed, substitute "Tray 4" wherever "Tray 5"
appears in this manual.
Tray 1
Tray 2
The machine
First tray Second tray
Tray 1 Tray 2
Bypass tray
Tray 5 (when a large capacity tray is installed)
Stand/2 x 500 sheet paper
Stand/1 x 500
drawer
sheet paper
drawer
First tray
Tray 3
– Tray 3
–
20
Second tray
– –
Tray 4
– –
Large
capacity tray
Tray 4
Tray 5
–