Sharp MX2300N User Manual page 683

Login by user number
Enter your user number.
1
Enter your user number.
2
• When an user number is set to a 8-digit number, this step is not necessary. (When an user number is entered, login
will take place automatically.)
• This completes the login procedure. After login, the system settings can be used.
For the procedure following login, see
• To configure and store LDAP settings, click [Network Settings] and then [LDAP Settings] in the Web page menu.
(Administrator rights are required.)
• When Auto Clear activates, logout automatically takes place.
• To logout...
Press the [LOGOUT] key (
OK
Admin Login
"When User Authentication is not
). (Except when entering a fax number.)
131
Enter your user number with the
numeric keys.
Each entered digit will be displayed as "
Touch the [OK] key.
Enabled" (page 128).
".