KYMCO PEOPLE 125 Manual page 157

14
. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
Remove the A.C. generator wire set plate.
Remove the pulser coil bolts.
Remove the A.C. generator wire rubber sleeve
and pulser coil from the right crankcase.
Remove the two bolts and A.C. generator
stator.
INSTALLATION
Woodruff Key
A.C. Generator Wire
Rubber Sleeve
Install the A.C. generator stator and pulser
coil onto the right crankcase.
Tighten the stator and pulser coil bolts.
Torques: Pulser Coil: 0.5kg-m
Stator
Install the A.C. generator wire rubber sleeve
and A.C. generator wire set plate.
14-9
www.PlanDeGraissage.org
Wire Set Plate
Stator
: 0.9kg-m
Flywheel
Cooling Fan
A.C. Generator
Wire Set Plate
Bolts
Pulser Coil
PEOPL E 125/150
Bolts
Fan Cover
Set Plate