Routine Maintenance; Cleaning The Model 306 - Opex Envelopener Omation 306 Operator's Manual

3.9. Routine Maintenance

It is important that you keep your machine clean and in good working order.
This will prolong the overall life of the machine and result in longer periods of
"up" time. Failure to perform daily cleaning tasks may result in the voiding of
your service contract. Therefore, it is vitally important that you perform the
following tasks at least once per day:

3.9.1. Cleaning the Model 306

1. Use a vacuum cleaner with a crevice tool to vacuum dust and debris from
all exposed components of the machine.
2. Clean the exterior surfaces and panels with a multi-purpose type cleaner.
- Use denatured alcohol on areas with stains, if necessary.
- Any non-flammable commercially available cleaning solution may be
used to clean the machine. When cleaning the OPEX Model 306, DO
NOT USE aerosol cleaners or compressed air because of the
flammable nature of many of these products. There is a risk of
equipment malfunction and/or injury associated with the use of aerosol
cleaners on OPEX equipment prior to the operation of equipment.
- When cleaning glass and plastic surfaces, use detergent-based
cleaners such as Fantastic™ or Formula 409™. Detergent-based
cleaners are recommended, because they do not cause component
degradation.
A cloth soaked with cleaning detergent or similar material should never be
used to clean an object such as a belt or roller when the belt or roller is being
driven by the system. Use of a cloth or similar material on moving
mechanisms can result in personal injury. If a belt, pulley or similar part needs
to be cleaned, it should be cleaned while stationary.
90
Omation® Model 306™ Envelopener® Operator Manual
OPEX Corporation use only - not for distribution
WARNING
Operation