Using Pc Cards - Epson ActionNote 910C User Manual

been installed correctly. See "Using PC
Cards" in Appendix B of the online
manual for instructions.
Your computer is set up to work with most
PC cards, but some cards require that you
install other software drivers, See the
documentation that came with your card.
The ActionNote comes with PCMCIA
drivers and utilities that you can use with
your card. Your operating system may
also include drivers. For details, see "Using
PC Cards" in Appendix B of the online
manual.
You may need to restart your computer
and select the appropriate option at the
PCMCIA driver prompt. Then try your PC
card operation again.
When you resume from Suspend to Disk
mode in Windows 3.11, your PCMCIA
drivers may not be reloaded or
reinitialized. Exit any application
programs you are using and restart your
computer; then, if necessary, select the
option to load your PCMCIA card drivers
at the prompt.
See the EPSON
Guide
for information about configuring PC
cards in DOS and Windows 3.11 using the
PCMCIA Card Software User's
Troubleshooting 7-13