A Pc Card Isn't Working - Epson ActionNote 910C User Manual

Make sure the Hard Disk option is set
correctly in Setup. If your hard disk drive
is not detected, you will have to configure
the appropriate hard disk drive
parameters yourself.
If you replaced or upgraded the hard disk
drive, make sure it is installed correctly
and that the operating system is installed.
See "Upgrading the Hard Disk Drive" in
Chapter 5.

A PC Card Isn't Working

The PC card slots on your computer
support PCMCIA version 2.1 or earlier and
accept up to two Type I or II cards, or one
Type III card. If you aren't sure your card
is compatible, call the EPSON Connection
or your Authorized EPSON Servicer for the
latest information about tested cards.
Like a diskette, a new PC RAM or hard
disk card may need to be formatted
(initialized) before you can use it. See the
documentation that came with your card
or driver for instructions.
Press the release button to remove the
card; then try inserting it again. Listen for
the beep tone indicating that the card has
7-12 Troubleshooting