Configuring Pc Cards - Epson ActionNote 650 User Manual

To check on the availability of drivers for non-Windows
applications, call the EPSON Connection or access the Epson
America Forum on CompuServe.

Configuring PC Cards

Whenever you turn on or reset your computer, you have a
number of options for configuring your PC card. The default
setting loads all PCMCIA drivers. You must load PCMCIA
drivers if you are going to use a PC card. If you are not going to
use a PC card, do not load any PCMCIA drivers because they
take up system memory that could be free for other uses. See
the EPSON Card and Socket Services User's Guide for more
information.
Once you have loaded the drivers and inserted a PC card, your
computer configures most cards automatically using card and
socket services software. Refer to the EPSON Card and Socket
Services User's Guide for more information on configuring your
PC card.
Caution
If you run the MS-DOS MEMMAKER utility, or load a
memory manager program (such as EMM386.EXE), you
must ensure that these programs do not interfere with the
memory addresses and other settings used by your PC card
drivers. See "PC Card Problems" in Chapter 5 for
instructions on using these programs.
2-14
Using Your Computer