Configuring Pc Cards - Epson ActionNote 866C User Manual

Your system also includes two DOS video utilities, SETVGA
and SETCOL, located in the C:\ UTIL directory. For more
information, type one of the following commands and press
Enter
at the DOS prompt in the C:\ UTIL directory:
SETCOL
SETVGA

Configuring PC Cards

Whenever you turn off or reset your computer, you see a
prompt asking if you want to load the PC card drivers. You
must load the drivers (the default setting) if you are going to
use a PC card. If you are not going to use a PC card, do not load
the drivers (press 2 and
up system memory that could be free for other uses.
Once you have loaded the drivers and inserted a PC card, your
computer configures most PC cards automatically using the
installed CardSoft
and utilities are for use with MS-DOS and CardView is for use
with Windows.
Caution
If you run the MS-DOS MEMMAKER utility, or load a
memory manager program (such as EMM386.EXE), you
must ensure that these programs do not interfere with the
memory addresses and other settings used by your PCMCIA
card drivers. See "PC Card Problems" in Chapter 5 for
instructions on using these programs.
Enter
at the prompt) because they take
TM
and CardView
TM
software. CardSoft drivers
Using Your Computer 2-13