Starting Setup; Changing The Settings - Epson ActionNote 910C User Manual

Notebook computer
Hide thumbs Also See for ActionNote 910C:
Table of Contents

Advertisement

Starting Setup

To start Setup, turn on your computer. (If your
computer is already on, save any files you've
been working on, then restart your computer
using
Ctrl Alt Del.)
During power-on diagnostics you see the
following prompt:
Press F8 to run SETUP
As soon as you see this message, press
If you do not press
computer loads the operating system. You can
restart the computer and try again.

Changing the Settings

When the computer starts Setup, you see the
Page 1 screen, which displays your computer's
memory configuration in addition to other
settings you can change. Base memory plus
extended memory is total system memory.
Use the right, left, down, and up arrow keys to
move the cursor from option to option. Once
you have highlighted an option you want to
change, press the + or - key or the spacebar to
scroll through the settings and select the one
you want. Press
or previous Setup screen.
6-4 Customizing Your Computer
within 5 seconds, the
F8
or
PgDn
PgUp
F8.
to go to the next

Advertisement

Table of Contents
loading

This manual is also suitable for:

Actionnote 900 series

Table of Contents