Upgrading The Memory; Pc Card Software - Epson 890 User Manual

ActionNote 890 Series Update
This update sheet contains additional information about your
computer.

Upgrading the Memory

Your system comes with 8MB RAM. In this system's
configuration, 4MB is on the system board and 4MB is on a
separate memory module inserted in the memory module
socket. To upgrade memory, you have to remove the 4MB
memory module from the socket and replace it with a larger
capacity memory module.
The maximum memory for this computer is 24MB. Use this
table to determine the size of the memory module you need to
buy. For information on how to replace a memory module, see
Chapter 5 of your User's Guide.
You want to upgrade to
12MB
20MB
24MB

PC Card Software

We have provided SystemSoft
drivers and utilities for you to use if you select MS-DOS
®
Windows
95 as your operating system, you can use the PC Card
(PCMCIA) utilities in the control panel.
Setup Option Changes
The power management functions in your BIOS contain more
options to let you customize your ActionNote. In addition to the
options documented in your User's Guide, you can also enable a
time out interval for the serial port, the parallel port, and the
diskette drive (FDD). Also, the default for the Power
Management option is Enabled.
3.11 as your operating system. If you select Windows
Memory module size to buy
8MB
16MB
20MB
®
CardSoft and Card Wizard
®
and