Connecting A Serial Device - Epson ActionNote 4SLC/25 User Manual

4. If the connector has retaining screws, tighten them by hand
or with a screwdriver.
5. Connect the other end of the cable to the printer. If the
printer interface has retaining clips, squeeze them gently
until they snap into place.
6. Connect the printer's power cable to a grounded (earthed)
electrical socket.
If the printer is connected when you turn on the ActionNote,
the computer automatically configures the port as the primary
parallel port.

Connecting a Serial Device

You can use the COM 1 and/or COM 2 port to connect serial
devices, such as a serial printer or plotter. You could also
connect a modem or pointing device, such as a trackball or
mouse.
Note
You cannot use the COM 2 port if the internal fax/modem is
installed.
Follow these steps to connect a serial device:
1. Make sure both computer and the serial device are off.
Connecting Optional Devices
4-5