Adding Memory Modules Or A Numeric Coprocessor; Removing The Keyboard - Epson ActionNote 4SLC/25 User Manual

Adding Memory Modules or a Numeric
Coprocessor
The sections below describe how to add memory to your
computer and install a numeric coprocessor. To access the
sockets for these options, you need to remove the keyboard.
Caution
It is best to have your Authorized Epson Servicer install the
memory module or a numeric coprocessor for you because
they can be damaged easily if installed incorrectly. If you
prefer to install them yourself, carefully follow all the
instructions in this section. If you have any questions at all,
please contact your Authorized Epson Servicer or call the
Epson Connection.

Removing the Keyboard

To remove the keyboard, follow these steps:
1. Make sure the computer is turned off.
2. Disconnect all cables from the ports and connectors on both
the sides and back of the computer. (Unplug the AC
adapter from its wall outlet, if necessary.)
3. Turn the computer upside down with the front facing you.
4. Remove the battery pack (as described in Chapter 3).
Connecting Optional Devices 4-11