Installing A Fax/Modem Or Infrared Device - Epson 890 User Manual

3. Press down on the module until it snaps
into the retaining clips on the sides
Replace the keyboard as described in the
4.
previous section.
5.
Run Setup, as described under
"Customizing Computer Settings' in
Chapter 6, to make sure your computer
recognizes the new memory. (When you
turn on the computer, it might warn you
of a memory size mismatch.)
Installing a Fax/Modem or
Infrared Device
If your computer did not come with the
internal fax/modem, you can install either a
fax/modem or an infrared device yourself. If
you have a fax/modem already installed, you
can replace it with an infrared device. Follow
these steps to install the device:
1. Remove the keyboard as described under
"Removing the Keyboard."
5-14 Upgrading Internal Components