Using The Embedded Numeric Keypad; Stopping A Command Or Program - Epson ActionNote 4SLC/25 User Manual

Using the Embedded
The embedded numeric keypad allows you to enter numeric
characters from the keyboard when the Num Lock function is
on. The numeric keypad is shown below:
Press
press the key to enter the numeric character printed on the
front of the key. You can press
alphabetic character on the key; press
key to enter the alphabetic character in uppercase.
When Num Lock is off, you can generate the numeric character
by pressing

Stopping a Command or Program

You may sometimes need to stop a command or program while
it is running. Many programs provide a command you can use
to cancel or even undo an operation. If you have entered an
MS-DOS command that you want to stop, try one of the
following commands:
Hold down
Hold down
Numeric Keypad
to turn Num Lock (and its LED) on and off. Then
plus the key.
and press
and press
plus the key to enter the
plus the
.
Using Your Computer
2-9