Using An External Monitor; Using The Serial Port - Epson ActionNote 866C User Manual

Using an External Monitor

When you connect an external monitor, make sure you turn it
on before you turn on the computer. Your system automatically
detects the external monitor and displays your data on its
screen. You can press
monitor to the LCD screen or to display on both screens
simultaneously. You can also change the default display mode
at start-up through the Boot Display option in Setup. See
Chapter 1 for instructions.
Your computer includes special Windows drivers and the
ChipsCPL utility that allow you to enhance the display
characteristics of your LCD and/ or external monitor. You can
also use the utility to select your display. For details, see "Using
Video Drivers and Utilities" in Chapter 2.

Using the Serial Port

You can use the serial port to connect a device such as a serial
mouse or fax/ modem. If you connect a serial mouse, you
should use the Setup program to disable the built-in trackpad,
as explained in Chapter 1.
The serial port is capable of sending and receiving data at a
variety of speeds and with many different protocols. This
means you need to configure the port to match the signals of
the serial device you connect.
As a general rule, choose the highest speed (baud rate) and the
protocol that provides the best error detection. Also, check the
documentation that came with your serial device to see if you
need to adjust any of the device settings.
Your computer's default setting for the serial port is 3F8H
(COM1). If you want to change this setting, run Setup as
described in Chapter 1.
Fn F10
to switch your display from the
Installing Optional Devices 4-3