Epson ActionNote 4SLC/25 User Manual page 141

This equipment complies with FCC rules, Part 68. On the underside of your computer is a
label that contains, among other things, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. You must, uponrequest, provide this
information to your telephone company.
An FCC compliant telephone cord and modular plug is provided with this equipment.
This equipment is designed to be connected to the telephone network or premises
using a compatible modular jack which is Part 65 compliant. See the installation
instructions for details.
The Ringer Equivalence Number (REN) is useful to determine the quantity of devices
may connect to your telephone line and still have all of those devices ring when your
telephone number is called. In most, but not all areas, the sum of the REN's of all devices
connected to one line should not exceed five (5.0). To be certain of the number of devices
you may connect to your line, as determined by the REN, you should contact your local
telephone company to determine the maximum RRN for your area.
Should this equipment cause harm to the telephone network, the telephone company
where practical, notify the customer that temporary discontinuance of service may be
required; however, where prior written notice is not practical, the telephone company may
discontinue service forthwith, if such action is reasonable in the circumstances. You will be
informed of your right to file a complaint with the FCC.
The telephone company may make changes inits communications facilities, equipment,
operation procedures, where such action is reasonable, required in the operation of its
business and is not inconsistent with the rules and regulations of the Federal
Communications Commission. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
Do not attempt to repair or modify this equipment. If defective, return it to the person
from whom it was purchased, who will in turn arrange to return it or to have it repaired
by the manufacturer or his authorized agent. The telephone company may ask that you
disconnect this equipment from the network until the problem has been corrected or until
you are sure that the equipment is not malfunctioning. If equipment is determined to be
malfunctioning, its use shag be discontinued until the problem has been corrected.
This equipment should not be used on coin service provided by the telephone company.
Connection to party line is subject to state tariffs.
B-24 Fax/Modem Command Set
MODEM
FCC INFORMATION
FCC part68
wiring
you
shall,