Changing The Password - Epson ActionNote 4SLC/25 User Manual

Changing the Password

If
you enable the Password Checking Opt ion on
the ADVANCED CMOS SETUP screen, you use the
CHANGE PASSWORD option to specify the password.
Caution
If you do set a password, be sure it is easy to remember. If
you forget your password, you will have to call the Epson
Connection for assistance.
When you select the
following prompt:
Enter CURRENT
Type the current password. (When you enable a password for
the first time, the current password is AMI.) You see the
following prompt:
Enter NEW Password :
Type your password using up to six characters. To protect your
password, the screen does not display what you type. After
typing the password, press
prompt:
Re-Enter NEW Password :
Type the same password again and press
your password for the system.) The program displays the
following message:
NEW Password Installed
Press
WRITE TO CMOS AND EXIT
5-12 Running Setup
CHANGE
Password :
to return to the main menu screen. Highlight
and press
option, you see the
PASSWORD
. Then you see the following
. (This confirms
.