Related Manuals for Classic Exhibits SUPERNOVA VK-2949D
Summary of Contents for Classic Exhibits SUPERNOVA VK-2949D
- Page 1 © 2023 Order #XXXXX VK-2949D General Layout 20’ 10’ Top View Perspective View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
-
Page 2: Plan View
© 2023 Order #XXXXX Plan View = 1 sq foot... -
Page 3: General Setup Instructions
© 2023 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly. - Page 4 © 2023 Order #XXXXX CEI152 Frame Assembly Slide both connectors across seam of extrusions. Disassembly Tighten all knobs. Straight Connection 1) Loosen all knobs. Straight Connector When assembling frame, first attach all straight 2) Slide connectors off of one extrusion. connectors, then attach corner connectors.
- Page 5 © 2023 SEG Installation Order #XXXXX Graphic Removal Corner A Corner B Corner D Corner C Step 1 Step 2 Step 3 It is important to first insert To remove the graphic from Insert corner A. Turn edge of Repeat Step 1 for opposite Once all corners are inserted, graphic into each alternate the frame, locate the fabric...
- Page 6 © 2023 Order #XXXXX Case Packing Top View of Each Level Setup Hardware Base Plates [1] (Qty. 2) Level 1 Level 2 Level 3 Case 1 of 4...
- Page 7 © 2023 Order #XXXXX Case Packing Top View of Each Level Graphics Level 1 Level 2 Case 2 of 4...
- Page 8 © 2023 Order #XXXXX Case Packing Setup Hardware Base Plates [1] (Qty. 2) Level 1 Level 2 Level 3 Level 1 Case 3 of 4...
- Page 9 © 2023 Order #XXXXX Case Packing Top View of Each Level Graphics Level 1 Level 2 Case 4 of 4...
- Page 10 © 2023 Order #XXXXX CEI152 Extrusion Assembly Item Qty. Description 5A/5A 47.5” Vertical Extrusion w/ Miter One End Steps: 1) Connect extrusions [5A] and [5A] together, using PR47 PR47 Connector (Top View) detail. PR47 PR47 Connector (Top View) [5A] Light PR47 [5A] Place [5A] against [5A].
- Page 11 © 2023 Order #XXXXX Left Backwall Assembly Item Qty. Description Base Plate 2/2A 38” Horizontal Extrusion w/ Miter One End 3/3A 38” Horizontal Extrusion 4/4A 38” Horizontal Extrusion w/ Miter One End 5/5A/5A 1/1/1 47.5” Vertical Extrusion w/ Miter One End 6/6A 47.5”...
- Page 12 © 2023 Order #XXXXX Right Backwall Assembly Item Qty. Description Base Plate 2/2A 38” Horizontal Extrusion w/ Miter One End 3/3A 38” Horizontal Extrusion 4/4A 38” Horizontal Extrusion w/ Miter One End 47.5” Vertical Extrusion w/ Miter One End 6/6A 47.5”...
- Page 13 © 2023 Order #XXXXX Left to Right Backwall Assembly Steps: 1) Attach left and right backwalls together, using brackets, bolts and V4 connectors. Note: V4 connectors stay attached when packing. Completed Assembly 6” x 12” Bracket Left Backwall Right Backwall Step 4 of 4...
Need help?
Do you have a question about the SUPERNOVA VK-2949D and is the answer not in the manual?
Questions and answers